![]() The benefit of using a table saw is you can set the fence once and make multiple cuts that will be the same size. You can cut all your pieces these tools, just make sure to take the time to measure accurately each time. I cannot break down a full sheet of 3/4″ plywood by myself on the table saw so I use my circular with the Kreg Accucut and Ripcut to do it. ![]() Table saw or circular saw with guide tracks.Then you use metal clips inside pressed into the shelf standard to hold the adjustable shelves. You could install them directly to the top of the plywood, but you would want to have a large enough face frame to help hide it from view. Shelf standards (pilaster strips) are typically installed into a routed groove in the inside of your bookcase. Make sure you use the appropriate sized drill bit for the shelf pins you bought. Shelf pins typically come in 5mm or 1/4″ sizes. To add holes for shelf pins, you can use a jig like this to drill holes that are perfectly straight and evenly spaced. In my display cabinet, I made the stationary shelf a statement by making a second box inside the firstįor adjustable shelves, you can use either shelf pins added to holes drilled in the plywood or strips called shelf standards or pilaster strips. If you are building a tall bookcase, you will need to add at least one stationary shelf in roughly the middle of the bookcase. Stationary shelves are attached to the sides of your bookcase and offer support. Shelves for paperback books: 6 1/2″ deepīookcases can easily be built with either stationary or adjustable shelves.Here are some common shelf depth recommendations for various bookcases.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |